OUT OF STOCK

STADLER FORM "TOM" AIRWASHER ONE

 Another two-in-one from Stadler Form! Slick and modern-looking TOM's specialty - washing and at the same time humidifying the air. His large rotating discs filter up to 50% of small to medium-sized particles out of the air, while raising relative humidity to comfortable levels by using a humidifying capacity of max. 3.5 gallons per day. It features automatic shut off to reduce power consumption, once his sizable 1.5 gallon tank is getting empty. Integrated Hygrostat supports exact humidification and fragrance dispenser will allow you to have your house smelling just the way you like it. Features "Extra Cleaning Cycle", which eliminates any need for dis-assembly by switching to TOM's self-cleaning mode.

Technical Specifications:

• Main Voltage: 110-120V
• Rated Power: 19 Watt
  
• Humidity Output: max. 3.5 gallons per day
• Tank Capacity: 1.5 gallon
• Size Dimensions: 14.9" x 18.1" x 8.9"
• Weight: 19.4 lbs
• Room size: up to 1000 sq ft
  

Features:

• Fragrance Dispenser
• 4 Output Levels
• Night Mode (dimmable LED lights)
• Automatic Shut-off
• Integrated Hygrostat
• Timer
  

---

Operation:

	1. This is the way the components inside are interconnected. Water bottle is placed neck-down into the tray.  Tray contains just enough water for 22 plates/rings to be submerged edge to edge. Plates are assembled together to form the drum that is being spun by a fan inside of the unit (see next picture) See LARGER pictures, get more info HERE
	2. When drum with is inserted into the body this fan happens to be right inside of the drum. While spinning fan rotates the drum. Drum rings are kept wet as they have to pass through the water container and air is constantly being mover through the plates while water is evaporating and vapor is dispensed into the room.
	3. Drum is lowered into the tray and pushed inside of the main housing. See LARGER pictures, get more info HERE
	4. Drum and tray is inserted into the main body the way that fan goes inside of the drum. The front panel is placed over this side to conceal the parts.
	5. If you are going to use fragrances please put them into this little tray before installing the side panel. See LARGER pictures, get more info HERE
	6. Two air filters - simply screens that will prevent bigger particles or insects getting into the unit are cleaned and inserted back into the unit. This unit is also called airwasher because it "washes" dust out of the air when dust sticks to plates and later it is washed of the plates when drum completes the circle and is submerged into the water again. So these screens do not serve as main filter.
	7. Then the bottle with water is inserted neck-down. See LARGER pictures, get more info HERE
	8. Top lid is installed.
	9. Controls illuminate so they are visible even in the dark room. See LARGER pictures, get more info HERE