You are here: Home > Miscellaneous > Sandia > Sandia Extractor > Sandia 6 Gallon Extractors > Sandia 6-Gallon 2-Stage 200 PSI Carpet Extractor with Heat
The Sandia 86-2200-H is a 6 gallon carpet extractor, featuring dual 2-stage vacuum motors. The pump produces 200 PSI of pressure, while the 2000 Watt heating element allows you to heat your extracting solution up to 200 degrees Fahrenheit.


Scroll down to see product schematics and part lists, followed by product listings


Number on
Schematic 		Manufacturer
Part Number 		Part / Item Description
Click on the Manufacturer Part Number to order and for more details
1 SN-6-ST-GRYGRAN 6-Gallon Solution Tank - Grey Granite
2 80-0017 Part of Bulkhead Fitting
3 80-0017 Part of Bulkhead Fitting
4 10-0846 1/4” MPT Hex Nipple for Extractor
5 10-0845 1/4” Strainer for Extractor
6
80-0011 90 Deg. Street Elbow
7 10-0869-REG 200 psi Regulator/Unloader
8 80-0026 3/8 Barb x 1/4 MPT 90 Deg.
9 10-0826 3/4" Hose Clamp for Sniper
10 80-0001 Extractor Exhaust Hose
11 80-0003-A 1-1/2" Black Lined Gray Hose
12 10-0806 1-1/2" Grey Hose Barb Fitting for Extractor
13 Bracket Part of 10-0869 Pump
14 80-0006 45 Degree Street Elbow
15
80-0011 90 Deg. Street Elbow
16
10-0803-H Splash-Proof Heater Switch
16
10-0803 Splash-Proof Switch for Extractor
17
80-0059-2 200 psi Gauge
18
80-0013 Switch Plate
19
Connector Part of Gauge
20
SN-6-L-BLKGRAN 6-Gallon Lid - Black Granite
21
80-0010 1/4" Brass Tee
22
80-0011-2 90 Deg. Street Elbow
23
80-0004 1/4” x 4” Brass Nipple
24
10-0852 1/4" 90 Degree Brass Elbow
25 10-0804-A Hatch Cover Gasket for Sniper
26 10-0804 Hatch Cover for Extractor
27 80-0012
Shut-Off assembly for Extract.
28 10-0416-A 1-1/2" Black ABS Stand Pipe"
29 80-0008
1.5 PVC Female Adapter
30 SN-6-RT-GRYGRAN
6-Gallon Recovery Tank - Grey Granite
31 10-0805 Dump Valve for Extractor
32
10-0849 1-1/2" ABS Fitting
33
10-0155 Hose Cuff Straight
34
10-0848-B 1-1/2" 90 Degree ABS Street Elbow
35
10-0833 Bolts for Extractor
36
80-0116 Spacer for Motor Screw
37
10-0811 2-Stage Extractor Motor
38
10-0838 Pigtail for Extractor (cord only)
39
10-0850 Strain Relief for Sniper
40 10-0822
Exhaust Grate for Sniper
41
10-1030-S2 2-Stage Extractor Motor Gasket
43
10-0830 Hinge Keeper for Extractor
44
10-0821 Extractor Hinge
45
10-0820 End Cap for Rod on Sniper
46
SN-6-MB-BLKGRAN 6-Gallon Motor Base - Black Granite
47
10-0836 19" Axle for Extractor
48
10-0807 Wheels for Extractor
49
10-0834 Pump Flat Washer
50
10-0835-N Nut for Pump Bolt on Sniper
51
10-0808 Caster for Extractor
52
10-0816 Caster Bolt 1/4-20 x 1/2 Hex Bolt
53
80-0040 3000 psi Hose for Sniper
54
80-0040 3000 psi Hose for Sniper
55
80-0040 3000 psi Hose for Sniper
56
10-0835-N Nut for Pump Bolt on Sniper
57
Pump Fitting Part of 10-0869 Pump
58
Pump Fitting Part of 10-0869 Pump
59
80-0015-3 Pump Mounting Plate
60
10-0833 Bolts for Extractor
61
Pump Hose A Part of 10-0869 Pump
62
Pump Fitting Part of 10-0869 Pump
63
Pump Hose B Part of 10-0869 Pump
64
10-0881 1/4” MNPT x 3/8” JIC 90 Degree
65
10-0869 200 psi Extractor Pump
66
10-0835-B Pump Bolt for Sniper
67
10-0400-D Keeper for Extractor Latch
68
10-0832 S/R Strap Bolts
69 10-0843 3/8" Black Hose for Sniper
70 80-0019 1/4 MNPT x 1/2 BARB 90 Degree for Extractor
71
80-0017 Bulk Head Fitting for Sniper
72 10-0379 8-32 x 3/8 Screw
73
10-0400-C Keeper Latch for Sniper
74
10-0868 1/4" Female QD for Sniper
75
10-0831 S/R Bracket for Sniper
76
10-0801-I 90 FPT for Sniper Heater
77
10-0878-B 1/4” MPT x 3/8” MJIC
78
10-0814-B Manual Sensor for Heater
79
10-0852 1/4" 90 Degree Brass Elbow
80
10-1500-A Heater Element 1000 Watt
81
10-0814 Sensor for Sniper Heater
82
10-0921 Aluminum Box for Dual Rod Heater
83
10-0901-B 275 psi Relief Valve for Heater
84
10-0920 Dual Rod Heat Exchanger Tube