KIRBY VACUUM FAN CASE ASSEMBLY

Has different gasket therefore will work only with Kirby Generation 3 (G4) and Kirby Generation 4 (G4) vacuum cleaner models

Manufacturer parts catalog #119789S

( 119789 )

NOTE - this part is brand new directly from Kirby company. We had some customers suspecting that these were refurbished / used parts because of some polishing compound residue that is left in areas hard to reach with the polishing wheel. Our technician had achieved much better results when polishing used parts by hand and this may be not possible to do by the machine or t least the way it is programmed by the manufacturer. Unfortunately we no longer do any polishing in the house and are not able to do any touch ups on new parts so you will get it exactly the way it comes from manufacturer.

IMPORTANT: We strongly suggest applying this Clear Silicone Glue on the perimeter of the front edge of the Kirby Base Pan, where the Fan Case will be attached. Only after that, fasten it with the screws. It has to be done, to ensure that it is attached hermetically, and no air leaks will occur.