Home > Kirby > Parts > Kirby G3 parts > Cloth Bag/Mini Emptor Asm >

Kirby G3 Mini Emptor
Kirby G3 Mini Emptor


 
Our Price: $43.60



Product Code: K-PRT-CBME-188989
Qty:

Description
 
MINI EMPTOR FOR KIRBY G3 VACUUM CLEANER

Discontinued


Part # 188989
( 188989 )

IMPORTANT NOTES :
It is VERY common for old style miniemptors break an leave a piece of plastic on the exhaust. Then new mini-emptor seems to be too small. Make sure all plastic is removed from exhaust so you can see rubber horn gasket ring and 3 rivets just like in the picture below.
Kirby exhaust neck picture

New mini-emptors are made to accommodate new style - "Snap-In" fill tubes.
The neck of the mini-emptor looks like this:

Kirby snap fil tube
And you will need to use fill tube like this:


If your old miniemptor neck that you are replacing is like this
Old style kirby fill tube
and the fill tube that is currently installed is this:



You need to get the new fill tube or better yet - entire fill tube/miniemptor assembly as the price for the assembly is less than for all components purchased separately.

You can get it HERE

WARNING: This product can expose you to chemicals including Di (2-ethylhexyl) Phthalate (DEHP), which is known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.P65Warnings.ca.gov

You may be interested
Kirby Fill Tube Tie
Our Price: $1.01

Add
Fill tube tie

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

Kirby > Parts > Kirby G3 parts > Cloth Bag/Mini Emptor Asm