Home > Kirby > Parts > Kirby G5 parts > Shampooer >

Kirby Shampooer Screen Black
Kirby shampoo system suds screen BLACK

Our Price: $3.26

Product Code: K-PRT-SHMP-316299S


Will NOT WORK with G3 and G4 models !!!
Original shampooer tanks had different design where screen would go OVER the shampooer tank neck while this goes INTO the tank neck !!! That old style screen is obsolete and not available anymore, you will have to buy a new tank if you screen cap goes over the shampooer tank neck.

When using ALWAYS make sure it is inserted in the solution tank where it has to be. Sometimes it stays in the hose when taking apart ad if it is not properly installed you will NOT have foam but will be pouring soapy water on the rug instead.
If it does not stay in you may want to heat up the plastic neck on the solution tank with a lighter so plastic becomes bendable and bend it inward just a little bit (not with fingers as plastic at this point is HOT) so it will create more friction with screen/plug and will not let it fall out. NEVER glue it in. Sometimes you will have to take it out and wash it.

Do this at your own risk. Use common sense - do not burn the tank and set the house on fire ...


Fits Kirby Models:
  • Generation 6 (G6)
  • Generation 5 (G5)

Kirby part number: 316299S

WARNING: This product can expose you to chemicals including Di (2-ethylhexyl) Phthalate (DEHP), which is known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.P65Warnings.ca.gov

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

Kirby > Parts > Kirby G5 parts > Shampooer
Kirby > Parts > Kirby G6 parts > Shampooer