Kirby Hard Floor Cleaner - Concentrate - To use with your Multi-Surface Shampooer
Part Number: 327614

Multi-Surface Shampooer Directions:

1. Vacuum or sweep floor to remove large debris.
2. Fill Kirby shampoo tank with warm water to first line. Add 1 tank cap full of Kirby Hard Floor Concentrate.
3. Adjust control valve on the shampoo tank to hard floor setting.
4. Working in small sections, pull the Kirby Multi-Surface Shampoo System with rotary mop inserted towards you to deposit foam on the floor.
5. Push the system forward to scrub the floor while picking up the foam.
6. Repeat cleaning procedure as needed.
7. Finish one area before moving on to the next.
8. Allow floor to dry completely before walking on surface.

Notice: Only for use on floor compatible with water based cleaning products. Test in an inconspicuous area prior to use. Wet surfaces may be slippery.

Included: Four 1 Gallon Bottles

Kirby Hard Floor Concentrate is used with Kirby Multi-Surface Shampooer only! Do not spray it directly on the floor!