Rainbow power nozzle wiring diagram
Last Updated: 05/28/2009
|
If you took the Rainbow nozzle apart and after you washed it or replaced manifold or housing you can not put it back together here is a diagram for you that will help you to get the wiring right. It may be especially handy when working with D4 and older SE nozzles where you will have to cut the wires to get it apart.
|
Disclaimer:
Goodvac.com is not affiliated with The Rexair, Inc.(Rainbow vacuum cleaner manufacturer). All manuals and maintenance tips for Rainbow vacuum cleaners and repair manuals for Rainbow model vacuums are authored by GoodVac.com and are not endorsed or approved by the Rainbow vacuum manufacturer - Rexair, Inc. These materials should be only used at your own discretion and risk.
Read our "Terms of Use". |
Rainbow power nozzle wiring diagram
|
Here is the wiring diagram for Rainbow vacuum power nozzle models D3, D4, SE, SE PE and e-series:
1. Motor
2. Circuit breaker
3. Light
4. Plug
5. Connection
6. Connection
We would like to reassure you that connection 5 and connection 6 are marked correct. The light will not short the circuit – it simply draws just enough power for the light so you will know that power is being supplied to the nozzle and if nozzle does not work – you may want to look for problem within the nozzle. |
|