800 775 6586
$100+ orders ship free We ship Worldwide WHOLESALE    


Commercial and industrial mats

Vacuum dealer trade association logo
You are here: Home > Kirby Vacuum > Parts > 1990 and older
Choose a sub category:
Power Cords Switches
Everything Else Kirby Hoses and Components
Kirby Nozzle Parts Outer Cloth Bags
Disposable Bags Wheels
Power Cords Switches
Everything Else Kirby Hoses and Components
Kirby Nozzle Parts Outer Cloth Bags
Disposable Bags Wheels
Quick jump to full selection of Kirby disposable bags by model:
Sentria bags (G10, SE) Generation 5 bags ( G5, G five )
Ultimate G Diamond bags ( G7D, DE, UGD ) Generation 4 bags ( G4, G four )
Ultimate G bags ( G7, UG ) Generation 3 bags ( G3, G three )
Generation 6 bags ( G6, G six ) Legend, Heritage, Tradition (Older Kirby bags)

Kirby GENERATION 3 Filter Bags (pack of 9)
Kirby bags for Legend II and Heritage II vacuum
Fit Kirby vacuum models: G3, Heritage II, Legend II
Bags per pack - 9
Filtration - Paper
Fitting - Round Elbow
Manufacturer - Kirby
Part # - 197289

Bags for G3, legend 2 and heritage 2 kirby vacuums
It says "Generation 3" on the package but will fit any of the following Kirby vacuum - Hetitage2, Legend 2, G3, G4, G5, G6 and G7 . Will also work on early Sentria models. This is a very basic filter - one layer filter paper. There is an opinion that older than G3 Kirby vacuums had less powerful motors than G3 and up. Therefore if you use any filters that are better by being more dense then performance of your Kirby sweeper fill suffer significantly. We would disagree that this would render Kirby nearly useless and think that you could use any of the Kirby filters that fit G3. Click HERE for full selection of these bags

Kirby STYLE No. 2 disposable filters (pack of 3)
Kirby Style 2 filterbags for Heritage 1
Fit Kirby vacuum models: Heritage (NOT HII)
Bags per pack - 3
Filtration - Paper
Fitting - VERTICAL Oval Elbow
Manufacturer - Kirby
Part # - 190681

Buy Kirby Legend and Heritage 1 bags
Bags made to fit Heritage 2 and Legend II Kirby sweepers. These are ONLY bags that have vertically-oriented oval opening for fill tube elbow. That was very beginning of the days when Kirby started experimenting with disposable filters and this was second design that was used only in Heritage vacuums. Heritage II already had different design. But to be on the safe side and make sure that bags will fit your vacuum still make sure it is compatible with your sweeper before you make the purchase.

Kirby STYLE No. 1 disposable filters (pack of 9)
Kirby Style one 1 bags come in 3 pack packages
Fit Kirby vacuum models: Tradition
Bags per pack - 3
Filtration - Paper
Fitting - HORIZONTAL Oval Elbow
Manufacturer - Kirby
Part # - 190679

Buy Kirby style 1 bags for Tradition model
The first Kirby vacuum to have the bag. There first Kirby disposable bag ever. Tradition is only model that uses Style #1 bags. All subsequent models had a different filter designs. So purchase Style 1 filters ONLY if you have Kirby tradition sweeper. Before you purchase still check what elbow you have installed. This is pretty old vacuum and unless you are the original buyer you may not be aware of some modifications that the sweeper may have undergone in the course of years.

This category is for not that popular parts for older Kirby vacuum cleaners such as:

Kirby Legend II (1989-1990)
Kirby Heritage II (1984-1989)
Kirby Heritage (1981-1984)
Kirby Tradition (1979-1981)
Kirby Classic III (1976-1979)
Kirby Classic Omega (1973-1976)
Kirby Classic (1970-1973)
Kirby Dual Sanitronic 80 (1967-1970)
Kirby Dual Sanitronic 50 (1965-1967)
Kirby Model 505 - Kirby Sanitronic VII (1950-1965)

For older Kirby vacuums fewer parts are available from the manufacturer. A lot of colors were changed over the years so even if we can get the part we do not guarantee that it will match the color of the original part.

We will be updating older Kirby parts selection as we go. If you do not see a part for your vacuum here it does not mean that we do not have it. Simply listing parts is a very time consuming work and we do not want to invest our time listing hundreds of old Kirby parts before we know what we will be selling. The most of such parts will not be in stock and you may have to wait 1 week or so till we get it in and ship. So if you do not mind taking a few minutes of your time and sending us an e-mail describing a part that you need and you are up for a little wait we will get it for you what you need.

Here is what we need from you:
Color of the Kirby vacuum handle and bag.
Your Kirby model name - look on the handle or there may be a metal plaque on the bottom of the unit with the model on it.
Description of the part - what it is made out of, what function does it perform and where is it installed. Send pictures if possible - this is very helpful.