 |
 |
 |
|
AQUAMATE II QUICK DISCONNECT, TUBING ASSEMBLY
This will not work with "twist-on" tubing connectors so if you replacing this part you want to make sure that this:
Is the connector you will use it with. If connectors on your Aquamate II look different - you will need to purchase the one above.
Also you will need to buy new style lower housing designed to work with the connector.
and upper housing:
You will need to use pointy pliers to break off 4 latches that hold upper and lower housings together. If you have to do it with the new design housing latches again - good news is that new style housings can be reused. For that you will need to drill 4 holes in lover housing in pre-marked locations and use 4 screws:
To hold housing halves together
Quick disconnect part #R11884 |
|
|
|
|
|
|
