Home > Kirby > Parts > Kirby G3 parts > Cloth Bag/Mini Emptor Asm >

Kirby Bag Fill Tube OLD style
Kirby fill tube OLD STYLE


 
Our Price: $6.76


Product Code: K-PRT-CBME-190384
Qty:

Description
 
KIRBY VACUUM SNAP FILL TUBE FOR DISPOSABLE BAG ( OLD STYLE)
Fits following Kirby sweeper models:
  • Generation 3 (G3)
  • Generation 4 (G4)
  • Generation 5 (G5)
  • And older such as Heritage, Heritage II, Legend II.

MAKE SURE YOU LOOK AT PICTURES AND READ COMPATIBILITYNOTES

Use cable ties to secure the tube on the top and well as on the bottom.

Unsure if this will fit, find out which fill tube you need here.

Part # 190384
( 190384 )


There are 2 kinds of fill tube For Kirby G3, G4 and G5 vacuum models.
THIS FILL TUBE IS THE ONE SOLD IN THIS LISTING
Used on older style miniemptors (plastic bag part):
Old style kirby fill tube

Later Kirby company made G3, G4 and G5 sweeper model miniemptors to accept the new style "Snap In" fill tube and the neck of the miniemptor is not thread-like but it has only one ridge. Fill tube end is pushed over this ridge and this is how it is being held onto the neck of the bag base. It is still recommended to secure the snap fill tube with one or two cable ties. Models after G5 had snap fill tubes pre-installed.
Kirby snap fil tube
If this is the one you need - go HERE.


WARNING: This product can expose you to chemicals including Di (2-ethylhexyl) Phthalate (DEHP), which is known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.P65Warnings.ca.gov
Average Customer Review: Average Customer Review: 5 of 5 5 of 5 Total Reviews: 1 Write a review.

You may be interested
Kirby Snap Tube Top Elbow
Our Price: $7.08

Add
Kirby snap top tube adapter
Kirby Fill Tube Tie
Our Price: $0.97

Add
Fill tube tie


  0 of 0 people found the following review helpful:
 
5 of 5 Great for rebuilding or Adding a Bag July 18, 2011
Reviewer: A. Cook from Henderson, CO United States  
This part works great for the dreaded fill tube break. Please note, Kirby does recommend you replace the entire assembly (mini-emptor, fill tube, bag adapter and cloth outer bag), I have not found this necessary if you launder the outer bag.

Was this review helpful to you?


Browse for more products in the same category as this item:

Kirby > Parts > Kirby G3 parts > Cloth Bag/Mini Emptor Asm
Kirby > Parts > Kirby G4 parts > Cloth Bag/Mini Emptor Asm
Kirby > Parts > Kirby G5 parts > Cloth Bag/Mini Emptor Asm
Kirby > Parts > Popular Parts > Bag Parts
Kirby > Parts > 1990 and older > Outer Cloth Bags