Home > Kirby > Parts > Kirby G3 parts > Attachment Set (G3) >

Kirby Variable Speed Hose End G3/G4
Variable suction blower G3/G4
 
Alternative Views:
Our Price: $15.93


Free Shipping
Product Code: K-PRT-ATT-211393S
Qty:

Description
 
Kirby vacuum cleaner
VARIABLE SPEED SUCTION/BLOWER CONNECTOR

Will work with following Kirby sweeper models:
  • Generation 3 (G3)
  • Generation 4 (G4)
Will not work with later models. Later Kirby vacuums have a different gasket.

How it works:
This is to be installed instead of the regular connector on the attachment hose.
ALL Kirby "Generation"series vacuums have 2 speeds. Lower speed is for vacuuming with the carpet nozzle attached to the unit and "high" - using attachment hose. Nozzle and hose simply press on different part of the safety switch that is in the front of the unit and this makes Kirby vacuum motor spin faster or slower.

This variable speed suction/blower connector has the pin that can be adjusted to press on the switch as if the nozzle would be attached so you can vacuum delicate things that may get damaged if vacuumed with Kirby running at "Full Throttle".

To replace:
Submerge the end into hot water (not too hot so you would be able to touch it) for about 30 seconds. The hose end will become soft enough to squeeze and get it out through the hole.

Part #211393s


WARNING: This product can expose you to chemicals including Di (2-ethylhexyl) Phthalate (DEHP), which is known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.P65Warnings.ca.gov

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

Kirby > Parts > Kirby G3 parts > Attachment Set (G3)
Kirby > Parts > Kirby G4 parts > Attachment Set (G4)
Kirby > Parts > Popular Parts > Attachments > Kirby Attachment Hose


Kirby Shampoo 1 gallon $29.06
Kirby shampooer Shield G4,G5,G6 $11.02