Home >

Kirby Vacuum Shampooer
Kirby shampooer
 
Kirby shampoo attachment parts HERE

Buy Kirby shampoo HERE


Free Shipping
Product Code: K-ACC-SMP
Qty:

Description Russian
 
DISCONTINUED
Kirby Shampoo System

This is for a complete shampoo system with box, matches the color for the Kirby Sentria 2 but will work with all other generation Kirby models manufactured ever since 1993,
Comes with everything pictured and also brush roller and belt within the nozzle/tray assembly that you can not see .in the picture.

SYSTEM:
Will work with:
  • Kirby Generation 3 vacuum cleaner (G3)
  • Kirby Generatin 4 vacuum cleaner (G4)
  • Kirby Generation 5 vacuum cleaner (G5)
  • Kirby Generation six vacuum cleaner (G6)
  • Kirby Ultimate G vacuum cleaner (UG, G7)
  • Kirby Ultimate G Diamond vacuum cleaner (UGD, G7D)
  • Kirby Sentria vacuum cleaner (G10)
  • Sentria II (Sentria2, G10D)
  • Avalir
  • Avalir 2
This Shampoo System comes in the Sentria 2 Color and comes with:
Set includes:
  1. Tray with shield
  2. Nozzle
  3. Brush roll
  4. Belt
  5. Container with cap
  6. Hose
  7. "Fluffer" shield
  8. 12 oz. Lavender Scented Shampoo

If you have never used this shampoo, we highly recommend reading our ONLINE MANUAL. This is a simple but very effective unit but you have to learn how to use it and "common sense" will not be enough!
HOW TO - V I D E O S

Operation:
Tank with soapy solution is attached in place of the bag. It utilizes the air coming out of the exhaust to blow soapy water on a small screen that turns it into thick foam. The foam is simply laid over the carpet (you must vacuum before you shampoo). Foam allows the spread of a small amount of water over the area so carpet is not soaked all the way through. Foam is left on the carpet for a few minutes so it has just enough time to moisten the fibers of the carpet and loosen the dirt (not too long otherwise foam may dry). Then foam maker is set to "OFF" and you slowly pull Kirby vacuum over the area where you laid the foam. The rotating brush in the shampooer nozzle rubs the moisture off carpet fibers and and throws it into the tray in front of the unit. You will not see gallons of dirty water but that is because you did not put it on the rug in the first place. Carpet should dry within 1-4 hours (depends how many times you laid the foam and what is humidity in the room). After it dries it has to be vacuumed. Solution that did not get picked up with the shampooer brush dries and shampoo additives do not let the dirt stick back to the fibers of the carpet. It is loose when it dries so in order to pick up what is left, you must vacuum again.
Shampoo:
You can use any carpet shampoo sold in your local store but make sure that this is carpet shampoo that makes foam and pay attention how much you have to dilute it with water as various shampoo products come in different concentration. Avoid using "just anything" that makes foam. Some household chemicals (such as dishwasher fluid) will do great job but it will leave carpet unprotected so dirt will stick to it so well that you will have a filthy rug in no time.
Disclaimer:
We are NOT affiliated with the equipment manufacturer in any way.
Warranty is through us only.

WARNING: This product can expose you to chemicals including Di (2-ethylhexyl) Phthalate (DEHP), which is known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.P65Warnings.ca.gov

You may be interested
Kirby Supplies Starter Kit
Our Price: $40.81

Add Free Shipping
Kirby Starter Kit

Share your knowledge of this product with other customers... Be the first to write a review


HM-400 HEGA Replacement Filter for Austin Air Health Mate Std. $252.72
Kirby Double Demo Tool
Rainbow E-Ring H527 $1.39
Kirby Shoulder Strap, Black (505/LGII) $4.76