Kirby Hard Floor Cleaner

CONCENTRATE

Part Number: 328417

Kirby Hard Floor Cleaner is effective on a number of hard floor surfaces, and will leave your floor with a good-as-new shine! No rinsing is required! Simply spray or pour onto the floor, then wipe off!

Multi-Surface Shampooer Directions:

1. Vacuum or sweep floor to remove large debris.
2. Fill Kirby shampoo tank with warm water to first line. Add 1 tank cap full of Kirby Hard Floor Concentrate.
3. Adjust control valve on the shampoo tank to hard floor setting.
4. Working in small sections, pull the Kirby Multi-Surface Shampoo System with rotary mop inserted towards you to deposit foam on the floor.
5. Push the system forward to scrub the floor while picking up the foam.
6. Repeat cleaning procedure as needed.
7. Finish one area before moving on to the next.
8. Allow floor to dry completely before walking on surface.

Notice: Only for use on floor compatible with water based cleaning products. Test in an inconspicuous area prior to use. Wet surfaces may be slippery.

Included: One 12oz Bottle

Kirby Hard Floor Concentrate is used with Kirby Multi-Surface Shampooer only! Do not spray it directly on the floor!

WARNING: This product can expose you to chemicals including Di (2-ethylhexyl) Phthalate (DEHP), which is known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.P65Warnings.ca.gov

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

Kirby > Supplies > Chemicals
Miscellaneous > Cleaning Solutions > Hard Floor Cleaners > Wood Floor

	Kirby Shampoo Brush Roll
	Rainbow D3 Switch Cover $2.06
	Kirby Cord G3, G4, G5, G6, UG $43.91
	Rainbow Motor Fan Spacer 0.28 $4.27