Home > Replacement Filters > Discontinued >

Rainbow Nozzle Motor Bracket / Strap
Rainbow Nozzle Motor Bracket / Strap
 


Free Shipping
Product Code: R-PRT-R1716
Qty:

Description
 
DISCONTINUED

Rainbow D2 / D3 / D4 / SE Motor Bracket

Originally motors in the nozzles were attached with this bracket. Later manufacturer put 2 "poles" inside with a hole for the screw. However it is still possible to use this bracket. It is especially time and money saving part when "poles" or motor housing breaks and it is impossible to attach the motor well within this housing. So instead of purchasing a whole new housing you can just use this strap to attach the motor in the old one. In newer (service) nozzle housings you may have to cut plastic mount inside the housing to make both of them on the same level. You will also need 2 screws that can be purchased HERE.

Part number R1716 ( 1716 )


WARNING: This product can expose you to chemicals including Di (2-ethylhexyl) Phthalate (DEHP), which is known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.P65Warnings.ca.gov

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

Replacement Filters > Discontinued


Rainbow Brush Roll Bearing Boot $1.58
Rainbow Latch Spring E/E2 $1.91
Rainbow E2 motor rope seal $3.11
Rainbow Nozzle Motor D3/D4/SE, 120V $58.71