Home > Rainbow > Parts > Rainbow E series > E motor unit parts >

Rainbow Front Plate E
Rainbow e faceplate
 
Alternative Views:
Our Price: $37.98


Free Shipping
Product Code: R-PRT-R9713
Qty:

Description Russian
 
RAINBOW 'E' SERIES VACUUM FACE PLATE

Part R7382. Old part number 9713 is nowhere to be found in the new parts catalog

REPLACEMENT INSTRUCTIONS:
  1. Unplug the Rainbow vacuum.
  2. Remove 2 clear lenses on the sides of the unit. You will have to use small flat screwdriver to release latches on the top of the lenses.
  3. Under the lenses there will be 4 or 6 Phillips screws - remove those. Then you will be able to remove Rainbow cap assembly and access the faceplate from inside.
  4. Unplug the faceplate harness
  5. The face plate is also attached to the main housing with 2 screws near the bottom - get those out.
  6. You may have to use a knife to cut through the glue on the bottom - between gasket and the intake duct (part of the faceplate) thus detaching the faceplate.
  7. Lift the face plate up by about 1/2 inch and pull it out
  8. When installing you may want to put a bead of weather-stripping glue around the intake where you had to cut the glue on the old faceplate.

Fits Rainbow Model Numbers:

  • E Series (E2 One Speed / E2 Gold One Speed)

Rexair Rainbow part (spares) catalog # R9713

WARNING: This product can expose you to chemicals including Di (2-ethylhexyl) Phthalate (DEHP), which is known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.P65Warnings.ca.gov

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

Rainbow > Parts > Rainbow E series > E motor unit parts


Rainbow Nozzle Label D3/D4/SE $8.67
Rainbow E2 Nozzle Snap-In Motor (New Style) $77.90
Aftermarket Rainbow Motor Bearing D4/SE AFT $6.23
Rainbow Clamp Ring Segment LARGE D4/SE