Home > Rainbow > Parts > Rainbow E2 (2 speed) series > E2 motor unit parts >

Rainbow E2 motor bottom seal
Rainbow E2 (2 speed) motor bottom seal/gasket


 
Alternative Views:


Our Price: $15.29


Product Code: R-PRT-R11458
Qty:

Description Russian
 
2 SPEED RAINBOW E2
MOTOR / PUMP BOTTOM SEAL/GASKET

Will fit all 2 speed Rainbow vacuum motors (High / Low / Fan).
Removal / Installation notes:
To remove motor you have to just tilt it till the seal will come out of the housing.
To remove the seal from the motor just grab the edge of the seal and pull it off.
To install the seal/gasket onto the motor simply push it onto the bottom fan case housing. Make sure you have aligned cutouts on the edge of the seal with holes for screws on the fan case so you can access screws assembling and disassembling the motor.
To instal the motor with the seal on it use soapy water to lubricate the edge of the seal that has to come through the opening in the housing. Align the motor exhaust with the opening where HEPA filter will have to be installed and press the motor into the housing. You may need to give it a little twist to get it through.



Fits Rainbow Model Numbers:

  • E2 Type 12 Black (Diamond)
  • E2 Blue (Platinum / Silver)
  • E2 Gold (Two Speed)
  • E2 Two Speed

Rexair Rainbow part (spares) catalog # R11458

WARNING: This product can expose you to chemicals including Di (2-ethylhexyl) Phthalate (DEHP), which is known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.P65Warnings.ca.gov

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

Rainbow > Parts > Rainbow E2 (2 speed) series > E2 motor unit parts
Rainbow > Parts > Rainbow E2 (blue) series > Blue E2 motor unit parts
Rainbow > Parts > Rainbow E2 (black) series > Black E2 motor unit parts