Knowledge Base:  
You are here: Knowledge Base > Rainbow FAQ
Taking off Rainbow e2 series nozzle cover
Last Updated: 05/14/2010
How to take off Rainbow e2-series vacuum cleaner nozzle cover? There are no screws that hold it to the main body..
Disclaimer:
Goodvac.com is not affiliated with The Rexair, Inc.(Rainbow vacuum cleaner manufacturer).  All manuals and maintenance tips for Rainbow vacuum cleaners and repair manuals for Rainbow model vacuums are authored by GoodVac.com and are not endorsed or approved by the Rainbow vacuum manufacturer - Rexair, Inc.  These materials  should be only used at your own discretion and risk.
Read our "Terms of Use".

Later Rainbow e2 series vacuum cleaner model nozzle covers are designed to snap onto the main nozzle body and are being helt by 2 plastic tabs behind the wheels.

Rainbow e series vacuum cleaner motor (main motor unit) dis assembly and assembly sequence

Remove both rear wheels

1

Use a flat srewdriver to pull the rear nozzle wheels out. Try to get the wheel as close to the stud as you can thus avoiding to break the wheel.

Release 2 tabs under the wheels

2

Once wheels come off you will see one tab on each side that holds the nozzle cover to the main body. Use the same flat screwdriver to release the tabs and cover will pop off.

 



Was this article helpful?

Comments:
 

Related Articles
 > How are Rainbow models different?
 > My Rainbow e-series Suddenly Stopped Working
 > Rainbow shuts down. After 10 minutes it starts and shuts down again.
 > AquaMate - I squeeze the trigger but nothing is coming out
 > Rainbow E2 will make a real faint noise but motor will not work
 > Rainbow e-series stinks
 > Rainbow power nozzle wiring diagram
 > Rainmate left working overnight
 > Taking apart D4 and SE motor unit and removing the motor
 > Taking apart D4 and SE motor
 > Taking apart Rainbow e series sweeper motor unit
 > The power head has a red light on it which goes on and off at random.
 > Rainbow vacuum cleaner E2 model 12 review by Goodvac.com
 > Rainbow vacuum cleaner BLACK E2 model pictures?
 > How often do I have to change Rainbow filter
 > How to clean plastic vacuum parts?
 > Newly installed e-series motor brushes keep sparking like crazy
 > AquaMate - geared belt keep breaking
 > Rainbow e-series (one speed) separator breaks while vacuuming