Knowledge Base:  
You are here: Knowledge Base > Kirby FAQ
Vacuum is vibrating when pushed forward
Last Updated: 05/28/2009
Kirby vacuum is vibrating when pushed forward. Why is that and is this something that I have to get fixed right away?
Possible Causes:
This usually happens on some short fiber or very dense carpets. When nozzle goes against the carpet fiber Kirby nozzle starts jumping.
Suggested Solutions :
Try vacuuming the same place while facing opposite way. Kirby Co. came up with new brush roll design that is supposed to reduce jumping . You can see it here . But it is nothing wrong with the Kirby and so do not worry about it too much.

Disclaimer:
 Goodvac.com is not affiliated with The Kirby Company and/or The Scott Fetzer Company.  All manuals and maintenance tips for Kirby vacuum cleaners and repair manuals for Kirby model vacuums are authored by GoodVac.com and are not endorsed or approved by the Kirby vacuum manufacturer - Kirby Company and/or The Scott Fetzer Company.  These materials  should be only used at your own discretion and risk. .
Read our "Terms of Use".




Was this article helpful?

Comments:
 

Related Articles
 > How We Rebuild Kirby Vacuums
 > Transmission does not work (inspecting primary drive belt)
 > Not sure what brush roll to buy
 > Self propelled function that makes the Kirby glide easily does not work
 > Remove Kirby outer bag strap
 > Kirby has no suction (belt and fan are fine)
 > Kirby vacuum stinks
 > How to replace Kirby N/D pedal and Bracket-Cam assembly
 > How to replace Kirby fan blade
 > How to replace Kirby power switch
 > Servicing Kirby slide assembly
 > Kirby G3 and G4 hose will not fit later Kirby models
 > How to replace Kirby belt lifter body (nozzle)
 > Kirby nozzle lock lever screw replacement
 > Can I use Kirby ZipBrush for spot shampoo
 > What does new or used Kirby mean?
 > "Buy or not to buy" Kirby vacuum during in home demonstration question answered in 5 minutes
 > How to cancel Kirby sweeper purchase from a dealer contract?
 > How much does Kirby vacuum cost?
 > How to buy Kirby vacuum online?
 > How can I make my Kirby vacuum shiny again?
 > How to tell if Kirby has ever been used?
 > Servicing New Kirby Sentria sweeper transmission
 > Vacuum cleaner testing description
 > How to use American switch in European model
 > Kirby does no start - safety switch
 > Kirby was in storage / basement for years
 > How are Kirby models different?
 > Kirby Sentria II model
 > New Kirby 100th Anniversary Avalir
 > Which Kirby Fill Tube do you need?